Interior and Exterior Painting at Val de Vie Estate

Completed Interior and Exterior Painting at Val de Vie Estate

Painters Cape Town completed an exterior and interior painting project at a private home inside Val de Vie Estate, near Paarl, during July and August 2026.

The exterior phase ran from 20–29 July 2026, followed by interior painting from 30 July–7 August 2026. The original quotation was prepared on 8 June 2026 and included a detailed assessment of existing coatings, plaster cracks, moisture-related defects, seals, horizontal masonry and different surface-finishing requirements.

This case study documents the actual project rather than providing another general painting-services page. For our wider local experience, visit Professional Painters Val de Vie.

Val de Vie Project Details

Original Val de Vie Project Photographs

The photographs below document different areas of the same property. The first shows an exterior boundary-wall area associated with the inspection, while the second shows part of the completed main-building exterior. They are not matching camera-angle before-and-after photographs of one wall.

What the Exterior Inspection Identified

The original June 2026 quotation recorded a combination of surface deterioration and potential water-entry routes. These defects required different preparation methods before decorative painting could proceed.

• Protimeter readings: Min 9%, Max 12.5%.
• Hairline, wider plaster and map cracking on exterior masonry.
• Cracks on walls, windowsills and exposed horizontal surfaces.
• Failed sealant around selected windows and doors.
• Mould on boundary and garden walls.
• Cracked or loose soffit cover-strip joints.
• Horizontal masonry requiring waterproofing.
• Expansion joints without suitable sealing.
• Moisture-sensitive foundation and boundary-wall areas.

Protimeter readings were considered alongside the actual construction and visible defects. Instrument readings alone do not establish the source of moisture or prove rising damp.

For further explanation, see Damp Proofing Paarl.

Exterior Preparation Before Painting

Cleaning and Fungal Treatment

The project specification included removal of loose coatings, grime, chalking and surface contamination. Appropriate exterior surfaces were cleaned as specified, with ProGold cleaning products where required.

Areas affected by fungal growth were specified for treatment with ProGold Fungal Wash before further preparation.

Horizontal Waterproofing with Dulux Rainshield

Exposed horizontal surfaces, including suitable parapets, windowsills and the tops of boundary or garden walls, were specified for two coats of Dulux Rainshield.

The quotation required the second application to be perpendicular to the first. The purpose was to protect suitable prepared horizontal masonry against rainwater entering through vulnerable surfaces.

Find out more in our Waterproofing Paarl guide.

Flexible Window, Door and Expansion-Joint Sealing

The assessment identified deteriorating sealant around certain windows and doors, as well as unsealed expansion joints and selected wall penetrations.

The written specification called for removal of defective sealant where required and replacement with suitable single-pack polyurethane sealant, selected for its flexibility.

Movement-sensitive joints were not treated as ordinary rigid plaster cracks.

Different Plaster Cracks Required Different Repairs

The quotation distinguished between hairline cracks, wider plaster cracks and map cracking.

Hairline Cracks

Fine cracks up to approximately 1 mm were specified for alkali-resistant sealing and Dulux Rainshield worked into the affected areas as part of the preparation system.

Wider Plaster Cracks

Suitable cracks from approximately 1–5 mm were specified to be opened into V-shaped joints, cleaned, repaired with compatible masonry patching material, sanded and prepared with the required waterproofing system before decorative painting.

Map Cracking

Networks of fine plaster cracks required preparation of the affected area rather than simply filling individual lines. The specified treatment included compatible primers and Dulux Rainshield where appropriate.

These methods describe this project’s written repair specification. Structural cracking or continuing movement would require separate assessment.

For further local evidence, visit Wall Preparation & Crack Repairs Paarl.

Main Exterior Walls — Dulux Weathershield

Following the appropriate cleaning, crack repairs, sealing, priming and waterproofing preparation, the original quotation specified two coats of Dulux Weathershield Smooth for the main-building exterior walls.

This is the coating system recorded in the June 2026 project quotation. It is distinct from the materials specified for the boundary walls, fascia boards and soffits.

Boundary and Garden Walls — Breathable Dulux Weatherguard

The boundary and garden walls were specified for two coats of Dulux Weatherguard Ultra Smooth, a breathable exterior coating selected for these surfaces.

Boundary walls can receive moisture from planted beds, ground contact, irrigation and inaccessible backfilled surfaces. Their moisture exposure can differ significantly from that of the main building.

Important Boundary-Wall Limitations

The original quotation expressly records that certain boundary walls lack an effective damp-proof barrier separating the masonry from ground moisture.

When water continues to migrate into the wall from below or behind, preparation and breathable decorative coatings cannot provide a permanent cure. Moisture-related discolouration, bubbling or peeling caused by continuing damp is excluded from the coating warranty under the documented specification.

Foundation Walls Below Expansion Joints

The inspection also recorded moisture-related discolouration beneath certain weep holes and expansion-joint levels.

The specified preparation included suitable Dulux Dampshield treatment, but continuing moisture entering from the backfilled side remained a clearly identified limitation.

This distinction is important when assessing paint performance: a coating cannot replace a missing damp-proof barrier or correct an inaccessible source of water.

Nutec Fascia Boards and Soffit Preparation

The project included Nutec fascia boards and soffits requiring different preparation and finishing products from the masonry walls.

Nutec Fascia Boards

Loose and flaking coatings were specified for removal, followed by sanding, cleaning and Dulux Plaster Primer. The finishing schedule specified two coats of Dulux Roofguard.

Soffits and Cover Strips

The quotation recorded cracked or loose cover-strip joints. Preparation included removing unsound paint, sanding, compatible priming and undercoating, and suitable flexible sealing around cover strips.

The specified finish was two coats of Dulux Wall & Ceiling Paint.

The Interior Painting Phase — July to August 2026

The exterior work was followed by interior painting, including the garage, between 30 July and 7 August 2026.

The documented scope covered walls, ceilings, plaster imperfections, certain moisture-affected areas, doors, frames, skirting and other painted joinery.

Protection of flooring, furniture and adjoining finishes was included in the preparation approach, with masking around relevant junctions and fittings where required.

Interior Walls and Crack Preparation

The quotation required obvious cracks, holes, dents and damaged plaster to be assessed and repaired before painting. Crack-repair methods were linked to the documented preparation specification rather than treating every defect with the same material.

Where more extensive wall skimming became necessary, it was identified as work requiring separate discussion and quotation.

Interior Damp-Related Preparation

Suitable damp-affected walls were specified for treatment with Dulux Dampshield according to the appropriate substrate and product requirements.

The coating specification did not imply that unidentified or uncontrolled moisture sources had been permanently eliminated.

Ceilings and Shadow Lines

The quotation covered preparation of ceiling imperfections and gaps between certain shadow-line details and adjoining walls, together with flexible sealing where specified.

A cracked ceiling-board joint was specified for mesh reinforcement before repainting. The ceiling finish was two coats of Dulux Wall & Ceiling Paint.

Interior Wall Finishes

The written specification offered Dulux Luxurious Silk or Dulux EasyCare, depending on the finish selected for the interior walls.

These product options should not be interpreted as evidence that both paints were applied throughout the property.

Doors, Frames and Skirting

Painted joinery required separate preparation from plastered surfaces. The specification included suitable filling and sealing, Dulux Wood Primer on bare areas, Universal Undercoat and two coats of Dulux Pearlglo Waterbased enamel on the relevant prepared woodwork.

For additional local interior examples, visit Interior Painters Paarl.

Painting Systems Documented in the Original Quotation

These products and methods reflect the original written quotation for this property. They are not a universal specification for other Val de Vie homes and do not, by themselves, establish that a formal manufacturer-backed warranty was issued for this project.

What This Completed Val de Vie Project Demonstrates

This project illustrates why preparation-first painting is especially important for large residential properties with different masonry, trim, joinery and waterproofing details.

It also demonstrates the value of a written inspection: cracks, failed seals, horizontal waterproofing, boundary-wall moisture, soffits and interior surfaces all required consideration before the appropriate finishing system could be selected.

The work was supervised by working foreman Patrick, with additional contractor visits. Our painters are company employees rather than subcontracted painting crews.

More Original Val de Vie Painting Projects

This July–August 2026 project is one example of our recorded painting experience inside Val de Vie Estate, which extends back to 2018.

Another completed project is our August 2025 Val de Vie roof painting project, supported by original before-and-after photographs and a separate written quotation.

For the wider local history, estate access experience, services and enquiries, visit our main Painters Val de Vie page.

Related services include Exterior Painters Paarl, Estate Painting Paarl and our regional Cape Winelands Painters page.

Request a Val de Vie Painting Quotation

If your Val de Vie home requires interior or exterior painting, crack repairs, suitable waterproofing, preparation of weathered coatings or detailed woodwork painting, the starting point is an inspection and written scope of work.

Call 082 374 6862 or visit our contact page to arrange a quotation.